Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems C-Flex™ 082 formulation tubing, 50-foot, ID 0.063"" x OD 0.188"" x Wall 0.063"" is manufactured from pharmaceutical-grade thermoplastic elastomer, fully validated and tested to a variety of specifications.
C-Flex is the original patented thermoplastic elastomer tubing specifically designed to meet the critical demands of pharmaceutical and biopharmaceutical applications for fluid processing. C-Flex tubing for Biopharma Manufacturing is specifically designed for aseptic welding connections and sealing disconnection. C-Flex is suitable for sterilization by gamma irradiation and autoclave. C-Flex is moldable, bondable and formable ideal for single-use assemblies, overmolds, tubing and bags manifolds. C-Flex tubing is manufactured from pharmaceutical-grade thermoplastic elastomer, is fully characterized, validated and tested to a variety of specifications. Extensive biological, chemical, physical properties and extractable testing is available to assist in the validation of C-Flex application. Sealable and weldable either pre- or post-sterilization. Sterilizable by gamma irradiation and autoclave. Complies with USP Class VI and ISO standards.
Med Vet International Dynarex Etco2 Nasal Sampling Cannula, 7' (2.1 M) Tubing w/Male Luer, Pediatric/Standard 02 Tubing Connector, 25/Case
Dynarex Resp-O2 EtCO2 Nasal Sampling Cannulas with Cushion Nasal Tips are designed to help monitor exhaled carbon dioxide during respiratory treatment. Each soft, cushioned cannula features a permanent barrier between the nasal prongs so that EtCO2 can be sampled from one nostril while oxygen continues to flow to the other nostril. Permanent barrier between nasal prongs allows for EtCO2 sampling with uninterrupted oxygen delivery Constructed from soft materials for added patient comfort Crush-resistant tubing helps prevent occlusion and kinking Features EtCO2 sampling line and O2 tubing of equal length Transparent design allows for clear visualization Not made with natural rubber latex or DEHP
Med Vet International Dynarex Etco2 Nasal Sampling Cannula, 7' (2.1 M) Tubing w/Male Luer, infant/Standard 02 Tubing Connector, 25/Case
Dynarex Resp-O2 EtCO2 Nasal Sampling Cannulas with Cushion Nasal Tips are designed to help monitor exhaled carbon dioxide during respiratory treatment. Each soft, cushioned cannula features a permanent barrier between the nasal prongs so that EtCO2 can be sampled from one nostril while oxygen continues to flow to the other nostril. Permanent barrier between nasal prongs allows for EtCO2 sampling with uninterrupted oxygen delivery Constructed from soft materials for added patient comfort Crush-resistant tubing helps prevent occlusion and kinking Features EtCO2 sampling line and O2 tubing of equal length Transparent design allows for clear visualization Not made with natural rubber latex or DEHP
Enzo Life Sciences ONO-RS-082 (100 mg). CAS: 99754-06-0
Phospholipase A2 inhibitor (IC50=7 µM for purified guinea pig lung PLA2). Inhibits epinephrine-stimulated thromboxane production in human platelets (86% at 3.5µM). Also blocks insulin secretion in pancreatic islets in response to glucose. Disrupts membrane tubule-mediated reassembly and maintenance of the Golgi complex. Alternative name: 2-(p-Amylcinnamoyl)amino-4-chlorobenzoic acid. Purity: ≥98% (TLC). Solubility: Soluble in DMSO (25mg/ml, warm) or 100% ethanol (10mg/ml, warm). Long Term Storage: Ambient.
Perkin Elmer US LLC Capillary Tubing for Mira Mist/Ari Mist - 0.44 in. O.D. x .018 in. I.D. x 0.5 m Long, Qty. 10
This includes a 10 pack of clear Polyethylene tubing with attached BRC 3 fitting for sample lines.
AVANTOR MASTERFLEX (VWR LLC) MASTERFLEX PUMP TUBING L/S 14
Masterflex L/S® Spooled Precision Pump Tubing, Peroxide-Cured Silicone, L/S 14; 250 ftMasterflex – Item # EW-96407-14
AVANTOR MASTERFLEX (VWR LLC) TUBING,3/16""ID X 5/16""OD,50FT
Masterflex Transfer Tubing, Tygon¿ SE-200 FEP-Lined, 3/16" ID x 5/16" OD; 50 Ft
AVANTOR MASTERFLEX (VWR LLC) Dow Corning Pharma-80 Tubing, 1/4"" (6.4) x 3/8"" (9.6), 50-ft pk
Applications: Pharmaceutical, biotechnology, and ultra-pure fluid processing. Characteristics: Semi-transparent platinum-cured silicone tubing with a very low extractable profile; it contains no phthalates, plasticizers, latex or other organic additives. Pharma tubing is hydrophobic, and remains flexible and resilient for long service life. Dow Corning maintains complete traceability from silicone to silicone tubing. Durometer, shore A rating of 75. Certification: Elastomer exceeds test guidelines for USP Class VI Plastics; tubing itself is FDA compliant, and meets 3A Sanitary Standards and European Pharmacopoeia (EP) Requirements. Pharma tubing is produced under Bulk Pharmaceutical (BP) current GMP principals. <
Accuflow Systems Saint-Gobain FEP Tubing, 3/16in ID, 1/4in OD, 50 ft
PharmaFluor FEP tubing is an inert fluoropolymer tube formulated for biopharmaceutical, pharmaceutical, and laboratory fluid transfer. It resists absorption and adsorption of aqueous fluids, is fully characterized for biocompatibility, and supports a broad temperature range suitable for processing and sterilization.
- Material: FEP (fluorinated ethylene propylene).
- Inner diameter (ID): 3/16 in (4.76 mm).
- Outer diameter (OD): 1/4 in (6.35 mm).
- Wall thickness: 0.031 in (0.79 mm).
- Length: 50 ft (15.24 m).
- Temperature range: -100°F to 400°F (-73°C to 204°C).
- Biocompatibility: meets USP <88> Class VI and ISO 10993-5.
- Typical applications: sterile filling and dispensing, diagnostic equipment, cell and tissue transport, bioprocessing and analytical systems.